Full Details
Boat Specifications
| Boat Type | Traditional Style Narrowboat |
| Where Lying | Ask for key V1 |
| When Manufactured | 1984 |
| Length | 56 ft |
| Layout | Standard |
| | |
| Hull Manufacturer | Stoke on Trent Boat Builders |
| Plating Specification | 10/6/4mm |
| Flat, V-Hull or Keeled | Flat Hull |
| Fitted out by | Owner |
| Cabin Height | 6'5" |
| Number Of Berths | 3 |
| Fixed Berths | One fixed double cross bed |
| Additional Berths | One bench/single bed |
Engine Specifications & Components
| Engine Make | Barrus Shire (New 2010) |
| No. Of Cylinders | 4cyl |
| Keel, Water or Air Cooled | Keel Cooled |
| Gearbox Make | PRM 150 D3 |
| Aqua Drive | No |
| Bow Thruster | No |
Hot Water & Heating Systems
| Source of Hot Water | Calorifier via engine and immersion |
| Central Heating | 2 radiators via the back bolier |
| Solid Fuel Stove | Boatman |
| Water Tank Capacity | Unknown |
| Material used | Polypropylene |
Electrical System & Components
| 12 Volt Lighting | Yes |
| 240 Volt Landline | Yes |
| Inverter | Giandel 300 w |
| Batteries | Three domestic and one starter |
| Additional Systems | 2 x Solar Panels and MPPT controller |
Bathroom Specifications
| Type Of Toilet | Cassette |
| Bath Fitted | Hip bath |
Kitchen Specification
| Make & Model Of Cooker | Kenwood KTG506sl9 |
| Make & Model Of Fridge | Swan |
| Gas, 12 volt or 240 volt | 12 Volt |
Fit Out Materials
| Insulation Used | Polystyrene |
| Types Of Wood Used | Pine |
| Window Types | Hopper |
| Materials Used | Auminium |
| Bulls Eye, Pigeon Box or Houdini Hatch | Pigeon box x 2 |
| Exterior Doors | Front - Wood, Back - Steel |
| Side Hatches | x 3 |
History Of Vessel
| Boat Safety Certificate | 2027 |
| Last Hull Blacking | 2018 |
| Anodes | 2018 |
| Recent Survey | 2018 |
Layout
Location
Location
Viewings
We are open seven days a week, please check the contact us page for our current opening hours, Our website is kept up to date and as soon as a boat goes Under Offer the website is amended. Please contact the office for further information.
It is the responsibility of the buyer to ensure that all particulars given in the course of the purchase of the boat are accurate. Such particulars are intended only as a guide and do not constitute a term of any contract.
Back To Top